The Aluminium Alloy 5754 Sheets & Plates are alloys in the wrought magnesium-aluminum family. It is a 5000-series aluminum alloy, the main alloying addition is magnesium, it is very similar to 5052 aluminum metal.
Alloy 5754 aluminum sheet plate sheet is sold basic materials but with high ductility and elongation, also have very good corrosion resistance, very small tension of the basic materials.
As a wrought alloy, it can be formed by rolling, extrusion, and forging, but not casting. It can be worked to produce tempers with a higher strength but lower ductility.
Alternate names and designations include:
- and A95754.
5754 Chemical Composition (For Reference)
5754 aluminium alloy is an alloy in the wrought aluminium -magnesium family (5000 or 5xxx series). It is closely related to the alloys 5154 and 5454. Of the three 5×54 alloys, 5754 aluminium is the least alloyed (highest composition % of aluminium), but only by a small amount. It is used in similar applications.
Since the 5754 aluminum alloys contain highest % aluminium composition it gets used in numerous applications. Other than aluminium it contains elements such as iron, silicon, manganese, copper, chromium, magnesium, and zinc.
Chemical Composition conforms to Chinese, American and European standard specification
Physical properties of 5754 aluminum sheet
As a wrought alloy, it can be formed by rolling, extrusion, and forging, but not casting. It can be cold worked to produce tempers with a higher strength but a lower ductility.
When making tooling, alloy 5754 aluminum plate sheet has consistent stability in the core of thick plates, have good welding properties as well.It is better in atomic hydrogen welding and contact welding, argon arc welding with crystallization crack tendency.
|Temper||Specified Thickness(in)||Tensile Strength – KSI||Elongationin 2 inches %|
|O||0.030 – 0.055||29||39||–||–||17|
|O||0.056 – 0.087||29||39||–||–||18|
|O||0.088 – 0.160||29||39||–||–||19|
5754 Alloy has good machinability in cold work hardening and half cold work hardening condition, and not good machinability in annealing state, can be polished.
|Melting Point||600 °C|
|Thermal Expansion||24 x10^-6 /K|
|Modulus of Elasticity||68 GPa|
|Thermal Conductivity||147 W/m.K|
|Electrical Resistivity||0.049 x10^-6 Ω .m|
|BS EN 485-2:2008
Sheet – 0.2mm to 6.00mm
|Proof Stress||60 Min MPa|
|Tensile Strength||160 – 200 MPa|
|Hardness Brinell||44 HB|
|Elongation A50 mm||12 Min %|
5754 aluminum sheet plate temper
The most common tempers for 5754 aluminium are shown below with H111 being the most common treadplate temper
- O – Soft
- H111 – Some work hardening imparted by shaping processes but less than required for H11 temper
- H22 – Work hardened by rolling then annealed to quarter hard
- H24 – Work hardened by rolling then annealed to half hard
- H26 – Work hardened by rolling then annealed to three-quarter hard
Applications of 5754 aluminum plate sheets:
Typical uses include: body panels and interior parts for the automotive industry. It can also be used for food processing, shipbuilding, and floor applications.
Alloy 5754 aluminum plate sheet has excellent corrosion resistance especially to seawater and industrially polluted atmospheres. It has higher strength than 5251.
This high strength makes 5754 highly suited to marine applications requiring a combination of strength and resistance to corrosion in sea water and flooring applications.
5754 is typically used in:
- Vehicle bodies
- Fishing industry equipment
- Food processing
- Welded chemical and nuclear structures
Please note that Mechanical Properties shown are for H22.
Specification of 5754 aluminum sheet
|Thickness||0.1 ~ 6.0mm for sheet,max 500mm|
|Width||600 ~ 2,200mm|
|Length||2,000 ~ 10,000mm|
- – Standard Width and Length: 4〃 x 8〃, 4“ x 4“ , 4 in. x 10 in. aluminum sheet, 5 x 10 aluminum sheet, 48‘ x 96’ aluminum sheet, 1219 * 2438mm, 1220mm x 2440mm aluminum sheet, 1000mm x 2000mm aluminum sheet, 1250mm x 2500mm, 1219x2438mm, 1524x3048mm, 1500mm x 3000mm aluminum sheet.
- – Surface Finish: Mill finish (unless otherwise specified), Color Coated, or Stucco Embossed
- – Surface Protection: Paper interleaved, PE/PVC filming (if specified)
- – Minimum Order Quantity: 3MT
Supplied Forms of 5754 aluminum plate:
Aluminium 5754 is supplied by Alu as mill finish aluminum sheet, 5-bar treadplate, rice grain treadplate, 2-bar checked plate, aluminum diamond plate.
|5754 Aluminum Sheet||Painted,
Bare, Mill Finish,
|O, H22, H24, H26, H32, H111||0.15-3.0||500-1600||500-16000|
|5754 Aluminum Plate||3.0-150||Up to 3100||Up to 6000|
|5754 Tread Plate||0.8-7.0||100-2600||500-16000|
5754 aliminum sheet and plates standard
5754 aliminum alloy and its various tempers are covered by the following standards:
- ASTM B 209: Standard Specification for Aluminium and Aluminium-Alloy Sheet and Plate
- EN 485-2: Aluminium and aluminium alloys. Sheet, strip and plate. Mechanical properties
- EN 573-3: Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition and form of products
- EN 754-2: Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Mechanical properties
- ISO 6361: Wrought Aluminium and Aluminium Alloy Sheets, Strips and Plates
Alu aluminum‘s service on 5754 aluminum alloy
The clients that demand product dimensions are offered with data that are indicative with full specifications.
You will get complete documents such as EN standards as per the industry references plus manufacturer datba.
The producers in order to assure that all buyers’ demands are easily meet regarding product quality particularly, it is very well tested.
The testing of the product is done after it is made with the utmost level and precise manufacturing. After the testing, the packaging is done with wooden boxes and cases. The cases and boxes ensure that no damage is being caused to the products.
To all the respected buyer’s various important documents are provided to assure that the better quality of sheet plates is supplied. The documents provided are fumigation certificate, quality assurance plan, and heat treatment chart, packaging list material traceability report, packaging list, guarantee letter and material test report.
The test certifications offered is a third-party test report, the lab test report and buyers report.
5754 aluminum alloy VS. 6061 aluminum
Both 5754 aluminum and 6061 aluminum are aluminum alloys. They have a very high 98% of their average alloy composition in common.
What are the 5000 series alloys?
It is a member of the 5000 series of aluminum-magnesium wrought alloys. others 5000 series aluminum alloy:
5005 Aluminum Sheet
5052 aluminum sheet
5083 Aluminum Sheet
5086 Aluminum Sheet
5182 Aluminum Sheet
5252 Aluminum Sheet
5454 Aluminum Sheet
5754 Aluminum Sheet
5A02 Aluminum Sheet
5A03 Aluminum Sheet
5A05 Aluminum Sheet
5A06 Aluminum Sheet
Alu is a manufacturer and supplier of 5754 aluminum plates. It has more than 10 years of production experience. The quality of the 5754 aluminum plates is stable. The specifications and sizes can be customized and free samples.